[Lone Sentry: WWII Tactical and Technical Trends]
©2009
  [Lone Sentry: Photographs, Documents and Research on World War II]
Home Page | Site Map | What's New | Intel Articles by Subject

"French 75-mm Shells in Mines" from Tactical and Technical Trends

The following intelligence report on the German use of French shells in mines was originally published in Tactical and Technical Trends, No. 45, April 1, 1944.

[DISCLAIMER: The following text is taken from the U.S. War Department publication Tactical and Technical Trends. As with all wartime intelligence information, data may be incomplete or inaccurate. No attempt has been made to update or correct the text. Any views or opinions expressed do not necessarily represent those of the website.]
 

FRENCH 75-MM SHELLS IN MINES

Among the purposes for which the Germans are using captured ammunition is the improvisation of wooden box mines, each containing four 75-mm French shells (for previous reference in Tactical and Technical Trends to this subject see No. 43, p. 7).

The box mines are 7 1/2 inches square and 12 inches high. Nose caps in the shells are removed and two of the four shells are plugged while each of the other two has a pressure igniter in place of the usual fuze. The lid of the box is loose and rests on the firing mechanisms, which presumably are pressure operated. No further details are available.

 
 


[Back] Back to Articles by Subject | Intel Bulletin by Issue | T&TT by Issue | Home Page
 
Advertisement

    
Google
Web LoneSentry.com